Copying both sides of cards, Onto one side (id card copy) (p. 83), Copying – Canon imageCLASS MF3010 VP Multifunction Monochrome Laser Printer User Manual
Page 88
Copying Both Sides of Cards onto One Side (ID Card
Copy)
85RS-026
You can copy both sides of cards onto one side.
<Before copying>
If the [
] indicator is on or other than [1] is displayed, the previous copy settings are
remained.In this case, press [
] to reset the copy settings.
If a key is not pressed for 2 minutes, the copy settings will be automatically reset.
NOTE
You can copy with combined the functions.
" Registering the Quantity that You Frequently Copy (Up to Twenty-nine Copies)(P. 78) "
" Adjusting the Density(P. 79) "
" Selecting Copy Type (Speed Priority/Resolution Priorlty)(P. 88) "
" Emphasizing the Outline of an Image (Sharpness)(P. 90) "
Changing the copy ratio
The output size is the same as the documents (100%).
Paper size requirements
A size larger than A4 or Letter.
Operating results
Operating procedures
Place the card on the platen glass, and then close it.
Place the card to align the center of the card with the arrow mark.
If you want to arrange the cards horizontally
If you want to arrange the cards vertically
Place the card with a 5 mm space created from the left edge of the
platen glass.
Place the card to fit in the left half of the platen glass.
Copy
83