Gefen EXT-MFP Audio/Video Multi-Format Processor - Manual (Page 128)

page | 118
Commands
Command Description
Audio
#set_mute MUTE/UNMUTE both analog and HDMI outputs
#get_mute Get MUTE/UNMUTE status
#set_analog_vol Set analog analog output volume
#get_analog_vol Get analog analog output volume
#set_analog_out Set analog output on or off
#get_analog_out Get status of analog output
#set_analog_mode Set analog analog output mode
#get_analog_mode Get analog analog output mode
#set_audio_link Set associated audio source for selected input
#get_audio_link Get associated audio source for selected input
EDID
#set_edid Set Bank/Output EDID To Input / Bank
#set_bank_name Set The EDID Bank Name
#get_bank_name Set The EDID Bank Name
Network
#set_ipmode Set Ip Mode To DHCP Or Manual
#get_ipmode Get Current IP Mode
#get_ipconfig Get Ip Configuration
#set_ipadd Set Ip Address
#get_ipadd Print The Ip Address To The Screen
#set_netmask Set Subnet Address
#get_netmask Print The Netmask Address To The Screen
#set_gateway Set Gateway Address
#get_gateway Print The Gateway Address To The Screen
#set_http_port Set The HTTP Communication Port
#get_http_port Print The HTTP Communication Port To The Screen
#set_telnet_enable Enable Or Disable Telnet Access
#get_telnet_enable Print The Telnet Access Status To The Screen
#set_telnet_port Set The Telnet Communication Port
#get_telnet_port Print The Telnet Communication Port To The Screen
#set_use_telnet_pass Enable Or Disable The Telnet Password
#get_use_telnet_pass Get Status Of Use Telnet Password
#set_telnet_welcome Enable Or Disable The Telnet Welcome Screen
#get_telnet_welcome Get Status Of The Telnet Welcome Screen
#set_udp_port Set The UDP Communication Port
A
dv
anc
ed Oper
ation
A
dv
anc
ed Oper
ation