Gefen EXT-MFP Audio/Video Multi-Format Processor - Manual (Page 129)

page | 119
Commands
Command Description
#get_udp_port Get The UDP Communication Port
#set_remote_udp_enable Enable Or Disable The Remote UDP Access
#get_remote_udp_enable Get Status Of Remote UDP Access
#set_udp_remote_ip Set The Remote UDP Ip Address
#get_udp_remote_ip Get The Remote UDP Ip Address
#set_udp_remote_port Set The Remote UDP Communication Port
#get_udp_remote_port Get The Remote UDP Communication Port
#set_udp_enable Enable Or Disable The UDP Access
#get_udp_enable Get Status Of The UDP Access
#set_webui_ad_pass Set The Web UI Administrator Password
#set_webui_op_pass Set The Web UI Operator Password
Discovery
#set_discovery Enable/Disable Discovery Service
#get_discovery Get Status Of Discovery Service
#set_showme Turn The Discovery 'Show Me' Feature On / Off
#set_discovery_mode Set The Discovery Read/Write Mode
#get_discovery_mode Get The Discovery Read/Write Mode
#set_device_descr Set The Device Description
#get_device_desc Get The Device Description
System
#set_osd_timeout Set OSD Timeout
#get_osd_timeout Get OSD Timeout
#set_display_notify Set Display Notifications
#get_display_notify Get Display Notifications
#set_feedback Turn (Unsolicited) RS-232 Feedback On Or Off
#get_feedback Get Status Of RS-232 Feedback On Or Off
#get_firmware_version Get Firmware Version
#set_ir_channel Set IR Command Channel
#get_ir_channel Get IR Command Channel
#factory_reset Reset To Factory Defaults
#reboot Reboot The Unit
A
dv
anc
ed Oper
ation