Emerson OXYMITTER 4000 - Manual (Page 166)

Instruction Manual
IB-106-340 Rev. 3.0
December 2003
12-2 Optional Accessories Rosemount Analytical Inc. A Division of Emerson Process Management
Oxymitter 4000
IMPS 4000 INTELLIGENT MULTIPROBE TEST
GAS SEQUENCER
The IMPS 4000 Intelligent Multiprobe Test Gas Sequencer is
housed within an IP56 (NEMA 4X) enclosure and has the intelli-
gence to provide calibration gas sequencing of up to four Oxy-
mitter 4000 units to accommodate automatic and semi-automatic
calibration routines.
This sequencer works in conjunction with the Oxymitter 4000
CALIBRATION RECOMMENDED feature, eliminating out-of-
calibration occurrences and the need to send a technician to the
installation site. In addition, the SPS 4000 provides a remote
contact input to initiate a calibration from a remote location and
relay outputs to alert when a calibration is in progress, an Oxy-
mitter 4000 is out of calibration, calibration gases are on, and
calibration gas pressure is low.
For more information, call Rosemount Analytical at
1-800-433-6076.
26170006
SPS 4000 SINGLE AUTOCALIBRATION
SEQUENCER
Rosemount Analytical specifically designed the SPS 4000 Single
Probe Autocalibration Sequencer to provide the capability to
perform automatic or on-demand Oxymitter 4000 calibrations.
The system can be installed either as an integral component to
an Oxymitter 4000 or at a remote location if space is limited or
corrosive conditions exist at the installation site.
The SPS 4000 works in conjunction with the Oxymitter 4000’s
CALIBRATION RECOMMENDED feature, eliminating out-of-
calibration occurrences and the need to send a technician to the
installation site. In addition, the SPS 4000 provides a remote
contact input to initiate a calibration from a remote location and
relay outputs to indicate when a calibration is in progress or the
Oxymitter 4000 is out of calibration.
For more information, call Rosemount Analytical at
1-800-433-6076.
INTEGRAL OR
REMOTE
26170007
OXYMITTER 4000