Generac Power Systems 8 kW LP User Manual

Page 157

Advertising
background image

Figure 14.

12. Remove Air Box: Using a 6mm allen wrench remove the

four intake manifold socket head cap screws. See Figure

15. Using a 4mm allen wrench, remove the four airbox

allen head shoulder bolts. While removing the airbox

remove the four rubber washers. See Figure 16.

Figure 15.

Figure 16.

13. Unbolt Oil Cooler: Using a 10mm socket remove the two

10mm bolts from the front of the oil cooler. See Figure

17. Remove the two 10mm bolts from the rear of the oil

cooler. See Figure 18.

Figure 17.

Figure 18.

Page 155

DISASSEMBLY

sEctioN 6.1

maJor DisassEmBlY

Part 6

Advertising
This manual is related to the following products: