Installing a pci card – Lenovo THINKSERVER RS210 User Manual
Page 140
Installing a PCI card
To install a PCI card, complete the following steps:
1.
Read the safety information in “Important Safety Information” on page 1 and “Guidelines for trained
service technicians” on page 115.
2.
Turn off the server and peripheral devices and disconnect the power cords and all external cables;
then, remove the server cover (see “Removing and installing the cover” on page 119).
3.
If you have installed an optional PCI-X riser-card assembly 2 , disconnect the riser-card power
cable 1 from the riser-card assembly.
1
Expansion-slot cover
5
PCI card
2
Expansion slot 2
6
Guide channels
3
Expansion slot 1
7
Riser-card assembly
4
Expansion-slot cover
8
PCI card
4.
Grasp the riser card at the front grip point and rear edges; then, lift to remove the riser-card
assembly. Place the riser-card assembly 7 on a flat, static-protective surface.
5.
Remove the expansion-slot cover on the slot that you intend to use.
Attention:
PCI expansion-slot covers must be installed on all vacant slots. This maintains the
electronic emissions characteristics of the server and ensures proper cooling of server components.
132
ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual