Microprocessor problems – Lenovo THINKSERVER RS210 User Manual
Page 66
Microprocessor problems
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
Trained service technician.
v
Go to the Lenovo support Web site at to check for technical information, hints,
tips, and new device drivers or to submit a request for information.
Symptom
Action
A microprocessor LED is lit
during POST, indicating that
the microprocessor is not
working correctly.
1.
Make sure that the server supports the microprocessor.
2.
(Trained service technician only) Make sure that the microprocessor is seated
correctly.
3.
(Trained the service technician only) Reseat the microprocessor.
4.
Replace the following components one at a time, in the order shown, restarting
the server each time:
a.
(Trained service technician only) Microprocessor
b.
(Trained service technician only) System board
58
ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual