Lenovo THINKSERVER RS210 User Manual
Page 36
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v
See Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
v
Go to the Lenovo support Web site at to check for technical information, hints,
tips, and new device drivers or to submit a request for information.
Error code
Description
Action
3808004
IMM system event log full
v
When using out-of-band, use the IMM Web
interface or IPMItool to clear the logs from the
operating system.
v
When using the local console:
1.
Run the Setup utility.
2.
Select System Event Log.
3.
Select Clear System Event Log.
4.
Restart the server.
3818001
Core Root of Trust Measurement (CRTM)
update failed
1.
Run the Setup utility, select Load Default
Settings
, and save the settings.
2.
(Trained service technician only) Replace the
system board.
3818002
Core Root of Trust Measurement (CRTM)
update aborted
1.
Run the Setup utility, select Load Default
Settings
, and save the settings.
2.
(Trained service technician only) Replace the
system board.
3818003
Core Root of Trust Measurement (CRTM)
flash lock failed
1.
Run the Setup utility, select Load Default
Settings
, and save the settings.
2.
(Trained service technician only) Replace the
system board.
3818004
Core Root of Trust Measurement (CRTM)
system error
1.
Run the Setup utility, select Load Default
Settings
, and save the settings.
2.
(Trained service technician only) Replace the
system board.
3818005
Current Bank Core Root of Trust
Measurement (CRTM) capsule signature
invalid
1.
Run the Setup utility, select Load Default
Settings
, and save the settings.
2.
(Trained service technician only) Replace the
system board.
3818006
Opposite bank CRTM capsule signature
invalid
1.
Switch the server firmware bank to the backup
bank (see “Starting the backup server firmware”
on page 213).
2.
Run the Setup utility, select Load Default
Settings
, and save the settings.
3.
Switch the bank back to the primary bank.
4.
(Trained service technician only) Replace the
system board.
3818007
CRTM update capsule signature invalid
1.
Run the Setup utility, select Load Default
Settings
, and save the settings.
2.
(Trained service technician only) Replace the
system board.
28
ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual