Nortel Networks 450 - Manual (Page 106)

Using the BayStack 450 10/100/1000 Series Switch
1-80 302401-D Rev 00
Figure 1-52. Address-Based Mirroring Configuration Example
In this configuration, the designated monitor port (port 23) can be set to monitor
traffic in any of the following modes:
• Monitor all traffic transmitted from address A to any address.
• Monitor all traffic received by address A from any address.
• Monitor all traffic received by or transmitted by address A.
• Monitor all traffic transmitted by address A to address B.
• Monitor all traffic between address A and address B (conversation
between the two stations).
Figure 1-53 shows the Port Mirroring Configuration screen setup for this example.
S1
S2
S3
BS45033A
StackProbe
T1
T2
F
F
Address B
Address A
Monitor port
(port 23)
kombk.book Page 80 Tuesday, June 29, 1999 3:25 PM