Nortel Networks 450 - Manual (Page 150)

Using the BayStack 450 10/100/1000 Series Switch
3-18 302401-D Rev 00
Switch Configuration
The Switch Configuration Menu screen ( Figure 3-6 ) allows you to set or modify
your switch configuration.
Choose Switch Configuration (or press w) from the main menu to open the Switch
Configuration Menu screen.
Figure 3-6. Switch Configuration Menu Screen
Table 3-5 describes the Switch Configuration Menu screen options.
Note: The High Speed Flow Control Configuration option only appears when
an optional gigabit MDA is installed.
Switch Configuration Menu
MAC Address Table
VLAN Configuration...
Port Configuration...
High Speed Flow Control Configuration...
MultiLink Trunk Configuration...
Port M irroring Configuration...
Rate Limiting Configuration...
I GMP Configuration...
Display Port Statistics
Clear All Port Statistics
Return to Main Menu
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 18 Tuesday, June 29, 1999 3:25 PM