Nortel Networks 450 User Manual

Page 107

Advertising
background image

BayStack 450 10/100/1000 Series Switches

302401-D Rev 00

1-81

In this example, port 23 becomes the designated Monitor Port for switch S1 when
you press Enter in response to the [Yes] screen prompt.

The Monitoring Mode field [ Address A - > Address B ] indicates that all
traffic transmitted by address A to address B will be monitored by the StackProbe
attached to Monitor Port 23.

Figure 1-53.

Port Mirroring Address-Based Screen Example

Note:

The screen data displayed at the bottom of the screen changes to show

the new currently active port mirroring configuration after you press Enter.

Note:

When you enter MAC addresses in this screen, they are also displayed

in the MAC Address Table screen (see “MAC Address Table” on page 3-20).

Port Mirroring Configuration

Monitoring Mode: [ Address A -> Address B ]
Monitor Unit/Port: [ /23 ]

Unit/Port X: [ / ]
Unit/Port Y: [ / ]

Address A: [ 00-44-55-44-55-22 ]
Address B: [ 00-33-44-33-22-44 ]

Is your port mirroring configuration complete? [ Yes ]

Currently Active Port Mirroring Configuration
---------------------------------------------
Monitoring Mode: -> Port X or Port Y -> Monitor Port: 23
Port X: 25 Port Y: 24

Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

kombk.book Page 81 Tuesday, June 29, 1999 3:25 PM

Advertising