Nortel Networks 450 - Manual (Page 170)

Using the BayStack 450 10/100/1000 Series Switch
3-38 302401-D Rev 00
Figure 3-16. MultiLink Trunk Configuration Menu Screen
Table 3-14 describes the MultiLink Trunk Configuration Menu screen options.
Table 3-14. MultiLink Trunk Configuration Menu Screen Options
Option Description
MultiLink Trunk
Configuration... Displays the MultiLink Trunk Configuration screen ( Figure 3-17 ). This screen
allows you to configure up to six MultiLink trunks within a standalone switch or
within a stack configuration. You can group up to four switch ports together to
form each trunk.
MultiLink Trunk
Utilization... Displays the MultiLink Trunk Utilization screen ( Figure 3-18 and Figure 3-19 ).
This screen allows you to monitor the bandwidth utilization of the configured
trunks.
Return to Switch
Configuration Menu Exits the MultiLink Trunk Configuration Menu screen and displays the Switch
Configuration Menu screen.
MultiLink Trunk Configuration Menu
MultiLink Trunk Configuration...
MultiLink Trunk Utilization...
Return to Switch Configuration Menu
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 38 Tuesday, June 29, 1999 3:25 PM