Nortel Networks 450 - Manual (Page 152)

Using the BayStack 450 10/100/1000 Series Switch
3-20 302401-D Rev 00
MAC Address Table
The MAC Address Table screen ( Figure 3-7 ) allows you to view MAC addresses
that the switch has learned or to search for a specific MAC address.
The MAC Address Table screen also operates in conjunction with the Port
Mirroring Configuration screen. When you configure a switch for MAC
address-based port mirroring, you can use the MAC Address Table screen to find
an address, and enter the address directly from this screen. You can enter
addresses from either screen, but you must return to the Port Mirroring
Configuration screen to activate the feature (see “
Port Mirroring Configuration ”
on page 3-45 ).
Choose MAC Address Table (or press m) from the Switch Configuration Menu
screen to open the MAC Address Table screen.
Display Port Statistics Displays the Port Statistics screen (see “Port Statistics ” on page 3-54 ).
This screen allows you to view detailed information about any switch
port.
Clear All Port Statistics Allows you to clear all port statistics.
This option is followed by screen prompts that precede a choice of the
actions:
•
If the switch is operating standalone, choose one of the following:
• Yes, to clear all port statistics for all switch ports
• No, to abort the option
• If the switch is participating in a stack configuration, choose one of
the following:
•
Clear all port statistics for a specific unit in the stack
• Clear all port statistics for the entire stack
• No, to abort the option
Return to Main Menu Exits the Switch Configuration Menu screen and displays the main
menu.
Note: This screen does not refresh dynamically to show new entries. To
refresh the screen, press [Ctrl]-R to return to the previous menu.
Table 3-5. Switch Configuration Menu Screen Options (continued)
Option Description
kombk.book Page 20 Tuesday, June 29, 1999 3:25 PM