Nortel Networks 450 - Manual (Page 123)

Installing the BayStack 450 Switch
302401-D Rev 00 2-15
Verifying the Installation Using the Self-Test Screen
If a monitor is connected to the switch (see “Console/Comm Port ” on page 2-10 ),
you can observe the BayStack 450 switch Self-Test screen ( Figure 2-11 shows an
example of a standalone switch Self-Test screen).
The results of the self-test are displayed briefly (5 or 10 seconds) on the Self-Test
screen, which is followed by the Nortel Networks Logo screen (
Figure 2-12 ).
Figure 2-11. BayStack 450 Switch Self-Test Screen
Note: The Self-Test screen remains displayed only if the self-test detects a
fatal error.
Note: The Self-Test screen for a switch that is participating in a stack
configuration includes an additional test: Cascade SRAM test
BayStack 450- XXX Self-Test
CPU RAM test ... Pass
ASIC addressing test ... Pass
ASIC buffer RAM test ... Pass
Port internal loopback test ... Pass
Fan Test
Self-test complete.
kombk.book Page 15 Tuesday, June 29, 1999 3:25 PM