Reset to default settings, Reset to default settings -90 – Nortel Networks 450 User Manual

Page 222

Advertising
background image

Using the BayStack 450 10/100/1000 Series Switch

3-90

302401-D Rev 00

Reset to Default Settings

The Reset to Default Settings option (accessed from the main menu) allows you to
reset a standalone switch, a specific unit in a stack configuration, or an entire
stack, and replace all configured switch parameters with the factory default
values. To view factory default values, see

Appendix F, “Default Settings

.”

The Reset to Default Settings option takes approximately 5 seconds to complete.
During this time, the switch initiates a self-test that comprises various diagnostic
routines and subtests. The LEDs display various patterns to indicate that the
subtests are in progress.

Caution:

If you choose the Reset to Default Settings command, all of your

configured settings will be replaced with factory default settings when you
press [Enter].

Achtung:

Bei Auswahl des Befehls zur Rücksetzung auf die

Standardeinstellungen werden alle von Ihnen konfigurierten Einstellungen
durch die werkseitigen Standardeinstellungen ersetzt, wenn Sie die
Eingabetaste drücken.

Attention:

Si vous restaurez la configuration usine, votre configuration

courante sera remplacée par la configuration usine dès que vous appuierez sur
[Entrée].

Precaución:

Si selecciona el comando Restaurar valores predeterminados,

todos los valores de configuración se sustituirán por las valores
predeterminados en fábrica al pulsar [Intro].

Attenzione:

Nel caso in cui si selezioni la reimpostazione dei valori di

default, tutte le impostazioni configurate verranno sostituite dai default di
fabbrica premendo il tasto [Invio].

kombk.book Page 90 Tuesday, June 29, 1999 3:25 PM

Advertising