Nortel Networks 450 - Manual (Page 35)

BayStack 450 10/100/1000 Series Switches
302401-D Rev 00 1-9
Figure 1-5. BayStack 450 Switch Back Panel
AC Power Receptacle
The AC power receptacle accepts the AC power cord (supplied). For installation
outside of North America, make sure that you have the proper power cord for your
region. Any cord used must have a CEE-22 standard V female connector on one
end and must meet the IEC 320-030 specifications.
Table 1-2 lists specifications
for international power cords:
Table 1-2. International Power Cord Specifications
Country/Plug description Specifications Typical plug
Continental Europe:
•
CEE7 standard VII male plug
• Harmonized cord (HAR marking
on the outside of the cord jacket
to comply with the CENELEC
Harmonized Document HD-21)
220 or 230 VAC
50 Hz
Single phase
(continued)
Cascade Module
Redundant Power
100-240V
47-63Hz~
1
2
3
1
2
3
= AC power receptacle
= RPSU connector
= Cascade Module Slot
BS45004A
228FA
kombk.book Page 9 Tuesday, June 29, 1999 3:25 PM