Nortel Networks 450 - Manual (Page 280)

Using the BayStack 450 10/100/1000 Series Switch
F-4 302401-D Rev 00
Packet Type Both Rate Limiting Configuration
(
page 3-48 )
Limit None
VLAN 1 IGMP Configuration ( page 3-51 )
Snooping Enabled
Proxy Enabled
Robust Value 2
Query Time 125 seconds
Set Router Ports Version 1
Static Router Ports - (for all ports)
Unit 1 Port Statistics ( page 3-54 )
Port 1
Console Port Speed 9600 Baud Console/Comm Port Configuration
(
page 3-58 )
Console Switch Password Not Required
Console Stack Password Not Required
Console Read-Only Switch
Password user
Console Read-Write Switch
Password secure
Console Read-Only Stack
Password user
Console Read-Write Stack
Password secure
Note: The following two fields only appear when the switch is a participant in a stack configuration.
New Unit Number Current stack order Renumber Stack Units ( page 3-65 )
Renumber units with new setting? No
Unit 1 Spanning Tree Port Configuration
(
page 3-69 )
Participation Normal Learning
Priority 128
Path Cost 10 or 100
(continued)
Table F-1. Factory Default Settings for the BayStack 450 Switch (continued)
Field Default setting Appears in this CI screen
kombk.book Page 4 Tuesday, June 29, 1999 3:25 PM