Table 3-13, Figure 3-15 – Nortel Networks 450 User Manual

Page 167

Advertising
background image

Using the Console Interface

302401-D Rev 00

3-35

Choose High Speed Flow Control Configuration (or press h) from the Switch
Configuration Menu screen to open the High Speed Flow Control Configuration
screen.

Figure 3-15.

High Speed Flow Control Configuration Screen

Table 3-13

describes the High Speed Flow Control Configuration screen fields.

Table 3-13.

High Speed Flow Control Configuration Screen Fields

Field

Description

Unit

Allows you to select the unit number (when stacking is configured) to view or
configure. To view or configure another unit, type its unit number and press
[Enter], or press the spacebar to toggle the unit numbers (the system only
displays a screen for units that are configured with a gigabit MDA).

(continued)

High Speed Flow Control Configuration

Unit: [ 2 ]

Autonegotiation: [ Enabled ]
Flow Control: [ Disabled ]
Preferred Phy: [ Right ]

Active Phy: None

Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

kombk.book Page 35 Tuesday, June 29, 1999 3:25 PM

Advertising