Nortel Networks Sun Fire V100 - Manual (Page 121)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
121 Copyright © 2006 Nortel Networks
2 Use the values from the table that follows to complete the
Database Base tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
3 Use the values from the table that follows to complete the
UNIStim Base tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
KA Phone Timer 90 default
Switch Server Delay 5000 default
Min ReReg Delay 60000 default
Max # Reg Attempts 25 default
Server Recovery
Time Min 1 default
Server Recovery
Time Max 5 default
Table 18 IP Client Manager tab (Sheet 2 of 2)
Parameter Recommended Value Notes Example
Table 19 Database Base tab
Parameter Recommended value Notes Example
Primary Host <machine logical IP address of
the primary database server> 192.168.14.21
Connections 5 default
Secondary Host <blank> Leave blank default
Table 20 UNISTIM Base tab
Parameter Recommended value Notes Example
LocalHost <machine logical IP address
of the IPCM server> 192.168.14.41
Port 5000 default