Nortel Networks Sun Fire V100 User Manual
Page 128
NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
128
Copyright © 2006 Nortel Networks
Procedure 37 Configuring the Provisioning Module tabs
At the System Management Console,
1
Use the values from the table that follows to complete the SIP
TCF Base tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
2
Use the values from the table that follows to complete the User
Agent Server tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
Table 25 SIP TCF Base tab
Parameter
Recommended value
Notes
Example
Transport Config
UDP=<machine
logical IP of IPCM
Server>:5070:optional
;TCP=<machine
logical IP of IPCM
Server>:5070:optional
Replace each
instance of
0.0.0.0 in the
UDP and TCP
string with the
machine logical
IP address of the
IPCM server
UDP=192.168.
14.41
:5070:optional;
TCP=192.168.
14.41
:5070:optional
192.168.14.41
Invite Timer
128000
default
Maximum Number of
Redirections
5
default
Initial Maximum Hop
Value
20
default
Table 26 User Agent Server tab
Parameter
Recommended value
Notes
Example
Application Server
Host
<service logical logical
IP address of the
application server>
192.168.14.31
Application Server
Port
5060
default
Click-to-call
Cancel Delay
18
default