Nortel Networks Sun Fire V100 - Manual (Page 42)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
42 Copyright © 2006 Nortel Networks
2
At the >ok prompt, boot the system: boot cdrom - install
[Enter]
Note 1: For instructions on how to get to the >ok prompt, see
Powering on the servers on page 105 .
Note 2: You must wait several minutes before information
begins to appear.
Select a Language
3 Select zero [0] for English,
0 [Enter]
Select a locale
4 Select zero [0] for English,
0 [Enter]
What type of terminal are you using?
5 Select three [3] for DEC VT100,
3 [Enter]
Note: The following message is displayed: The system is
coming up. Please wait.
ATTENTION
Make sure you put spaces before and after the hyphen: boot
[space] cdrom [space] - [space] install.
ATTENTION
Language selection must be English regardless of actual location of MCS
system.
ATTENTION
Ignore any time zone and syntax errors you receive. You will set
the time zone and additional information in the next procedure.