Nortel Networks Sun Fire V100 User Manual
Page 75
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
75
Copyright © 2006 Nortel Networks
5
Please enter the correct number of the load to
deploy:
Example
[@mcsmgmt]/export/home/nortel:=>
mgmtdeploy.pl
Obtaining input required to deploy and
configure the mgmtsvr bundle
Please enter all IP addresses in
dot-notation format
==========================================
Querying DSM for available loads
Select a mgmtsvr load from the following list
[1] mgmtsvr_all-micro_ims_3.0_buildxxxx
[2] mgmtsvr_all-small_ims_3.0_buildxxxx
[3] mgmtsvr_all_ims_3.0_buildxxx
Please enter the number [1] of the load to
deploy: 2
6
Is the database replicated?
N [Enter]
7
Enter Machine Logical IP Address - Primary DB:
<machine logical IP address of the database
server>
Example: 192.168.14.21
8
Enter the Machine Logical IP Address - Mgmtsvr:
<machine logical IP address of the management
server>
ATTENTION
When selecting the management server load, always select the
load that contains the word ‘small’ in it. If the non-small load is
selected, the installer will receive an Out Of Memory error.
The server load names are:
• mgmtsvr_all-mico-ims — for a 2-server installation.
• mgmtsvr_all-small-ims — for a 4-server or an 8-server V100
installation.
• mgmtsvr_all_ims — for an 8-server N240 installation.