Installing the uftp basesoftware, Prerequisites, Add the uftp to the system management console – Nortel Networks Sun Fire V100 User Manual
Page 125
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Installing the UFTP BaseSoftware
You will be installing the UFTP software on the IPCMProvWCM
server(s).
Prerequisites
The System Management Console has been successfully installed and
started.
Note: This procedure also assumes that the IP Client Manager
(IPCM) component was deployed successfully; the UFTP software
therefore can interact with the IPCM for firmware.
Add the UFTP to the System Management Console
Procedure 35 Adding the UFTP software
At the System Management Console,
1
Select Sites->MgmtSite->IPCMProvWCM.
2
Click on the plus sign next to the component to which you are
adding the base software.
3
Right click on the Components folder.
4
Select Add->BaseSoftware.
5
A list of loads appears in the pop-up window. Select the latest
“UFTP” load.
6
Click Apply.
ATTENTION
The UFTP BaseSoftware has no configuration items. Once the installer
clicks Apply, the deployment of the UFTP BaseSoftware occurs
immediately. Once the deployment is complete, UFTP will appear in the
System Management Console file tree.