Nortel Networks Sun Fire V100 - Manual (Page 73)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Deploying and starting the Sysmgr
Prerequisites
The dbdeploy.pl script is successfully deployed on the database.
Deploy the Sysmgr for a non-redundant configuration. The operator
logs into the machine logical IP address of the management server. At
the UNIX prompt, the operator the uses the script mgmtdeploy.pl to
deploy and start the Sysmgr. This process is described in the following
section.
Deploying and starting the Sysmgr
Procedure 21 Deploying and starting the Sysmgr
At the management pc,
1 Using PuTTY SSH, log into the management / accounting
server:
ATTENTION
Refer to the customer-specific information for hostname, IP
addresses, subnet masks, and so on.