Nortel Networks Sun Fire V100 - Manual (Page 26)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
26 Copyright © 2006 Nortel Networks
Figure 6 Sun Fire V100 server network callouts
Note 1: If the network is down, or the server needs to be
configured or restarted, use the console port A.
By default from manufacturing, serial port A is the only active
serial port.
Note 1: The cables with part numbers A0500465 or
NTVW01IM are serial cables.
Note 2: The P1 end goes to the V100 server and the P2 end
goes to the MRV terminal server.
Figure 7 P1 and P2 custom cable connections to terminal server
See note
Note: This cable is only connected in order to configure the terminal server.
Following configuration, remove the cable.