Nortel Networks Sun Fire V100 User Manual

Page 29

Advertising
background image

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide

Copyright © 2006 Nortel Networks

Installing and accessing the MRV
LX-4000 series terminal server

The MRV LX terminal server allows the installer to access all the
servers simultaneously.

Procedure 4 Connecting the MRV LX terminal server cable to the
servers and management PC

At the terminal server,

1

Connect port 16 to the management PC using the console cable
and db9 connector that comes with the MRV LX terminal server.

Note: After the terminal server has been configured, the
connection between the management PC and the terminal
server is not needed, and the cable can be removed.

2

Connect the MRV terminal server 10 Base-T port to the layer-2
switch.

Refer to the Getting Started with the LX-4000 Series document
in the CD that comes with your terminal server for specific
information about the pinouts on your terminal server model.

Procedure 5 Accessing the MRV LX terminal server

At the browser address field,

1

Type in the IP address of your MRV LX terminal server. The LX
Series Configuration Console page appears, as shown.

ATTENTION

For complete information on how to install, configure, and access
the MRV LX terminal server, refer to the MRV Communications,
Inc., LX Series Software Kit CD, particularly the "Getting Started
with the LX-4000 Series" and LX-4000 Quick Start Instructions
that come in the terminal server box, or go to www.mrv.com.

Advertising