Nortel Networks Sun Fire V100 User Manual
Page 39
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
39
Copyright © 2006 Nortel Networks
3
In the hostname field, enter <IP address of the MRV LX
terminal server>
4
For port, enter <the port number which corresponds to A/LOM
(Serial A) on the V100 and the MRV LX terminal server>.
Note 1: For LOM ports, use terminal server ports 2100-2400
(physical ports 1-4). For Serial ports, use terminal server ports
3100-3400 (physical ports 11-14).
The port number identifies the location of the target host. This
value is based on the following formula: 2000 + (Port number
physically connected on the MRV LX terminal server x 100).
For example, if the target host is connected to port 9 of the
MRV LX terminal server, then the port number would be 2900.
Port 12 is the port on the back of the MRV LX terminal server
that translates to 3200.
Note 2: Once the connection is established to the target host,
the communication between the user and the component is
treated exactly like a console connection.