Installing oracle 9.2.0.4 on the database server, Installing oracle 9.2.0.4 – Nortel Networks Sun Fire V100 User Manual
Page 67
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Installing Oracle 9.2.0.4 on the database
server
The procedures to install Oracle 9 on the DBSvr include storing Oracle
9 CDs 1-6 to your local hard drive. Refer to the section that follows.
Approximate time for loading Oracle 9 = 90 minutes
Installing Oracle 9.2.0.4
Procedure 19 Installing Oracle 9.2.0.4 on the database server
(DBSvr)
At the management pc,
1
Use PuTTY to connect to the database server using Serial port
B, which connects to the LX terminal server.
Log in as root to the database server.
2
Enter your <customer-specific password>.
3
Insert Oracle 9.2.0.4 CD 1 into the CD-ROM drive.
ATTENTION
Refer to the CSI datasheet for such items as the hostname, IP
addresses, and subnet masks.
ATTENTION
Perform these steps on all servers in parallel if multiple CDs are
available.