Nortel Networks Sun Fire V100 - Manual (Page 141)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
141 Copyright © 2006 Nortel Networks
2 Use the values from the table that follows to complete the IMS
Main Database tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
Monitor functions:
Polling interval (min) 1 default
Active checked default
Table 37 Oracle Server tab (Sheet 2 of 2)
Parameter Recommended value Notes Example
Table 38 IMS Main Database tab (Sheet 1 of 4)
Parameter Recommended value Notes Example
SNMP request port 9161 default
SNMP agent IP address <either the word
"localhost" or the
machine logical IP
address of the
database server that
this Oracle Monitor is
running on> 192.168.14.21
Oracle Server name imsdb1 default
Oracle Database name imsdb1 default
Active checked default
Component name TableSpace default
Polling interval (min) 1 default
Active checked default
Gauged Component
Monitoring: Threshold
monitors: Gauge name percentageUtilization default
Gauged Component
Monitoring: Threshold
monitors: Upper limit 100 default