Nortel Networks Sun Fire V100 User Manual
Page 45
MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
45
Copyright © 2006 Nortel Networks
Name Service/Name Service
14
Confirm the name service information by using the down arrow
key to navigate to None. Press the Return key. Press Esc+2 to
continue.
Continuing the process
15
Confirm your information. Ensure all fields are filled correctly.
Press Esc+2 to continue.
Press Esc+4 if you need to change anything.
16
At the Regions prompt, select the country where the system is
going to be deployed. Use the arrow keys to navigate to the
required country and press the spacebar to mark your choice.
Ignore time zone syntax errors.
Press Esc+2 to continue.
17
At the Time zones prompt, select the time zone (for example,
Central for the Richardson, Texas, area) where the system is
going to be deployed. Use the arrow keys to navigate to the
required time zone and press the spacebar to mark your choice.
Press Esc+2 to continue. Please wait for the next prompt.
18
At the Date and time prompt, set up the date and time.
Press Esc+2 to continue.
19
Confirm information. Ensure all fields are filled correctly.
Press Esc+2 to continue and wait for the message: System
identification is completed.
20
You will see the following message. Select option 2, then press
Enter:
*********************************************
1) 2-server Micro Configuration
2) 4 or 4+ Standard Configuration
**********************************************
ATTENTION
Make the following selection very carefully. If you make a mistake
at this point, you will need to start over, beginning with
. The selection of the number depends
on the configuration type.