Nortel Networks Sun Fire V100 User Manual
Page 44
NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
44
Copyright © 2006 Nortel Networks
Subnets/System part of a subnet
8
Accept the default Yes by pressing Esc+2 to continue.
Netmask/Netmask
9
Enter the subnet mask, for example: 255.255.255.0.
Press Esc+2 to continue.
IPv6/Enables IPv6
10
Accept the default No.
Press Esc+2 to continue.
There is a slight delay between screens. Please wait.
Confirm information
11
Ensure all fields are filled correctly. Press Esc+2 to continue.
Press Esc+4 if you need to change anything.
Configure Security Policy
12
Confirm the Kerberos information by accepting the default No.
Press Esc+2 to continue.
Confirm information
13
Ensure all fields are filled correctly. Press Esc+2 to continue.
You will see the message Starting remote procedure
call (RPC) services: sysidnsName Service.
ATTENTION
Do not accept the default unless you are sure it is correct for your
subnet.
ATTENTION
IPv6 is not supported.