Nortel Networks Sun Fire V100 - Manual (Page 144)

NN10287-301 MCS 5100 3.5 Standard 5.0 December 2006
144 Copyright © 2006 Nortel Networks
3 Use the values from the table that follows to complete the
Database Base tab parameters.
The shaded rows indicate values that must be addressed by the
installer.
Monitor functions:
Component name OperationalStatus default
Monitor functions: Polling
interval (min) 1 default
Monitor functions: Active checked default
Monitor functions:
Component name DataFile default
Monitor functions: Polling
interval (min) 1 default
Monitor functions: Active checked default
Monitor functions:
Component name CacheHitRatio default
Monitor functions: Polling
interval (min) 1 default
Monitor functions: Active checked default
Trap handlers: Trap
handler name oracleDBTrapHandler default
Active checked default
Table 38 IMS Main Database tab (Sheet 4 of 4)
Parameter Recommended value Notes Example
Table 39 Database Base tab
Parameter Recommended value Notes Example
Primary Host <machine logical IP
address of the
database server> 192.168.14.21
Connections 1 default
Secondary Host <leave blank> default