Nortel Networks Sun Fire V100 - Manual (Page 179)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
179 Copyright © 2006 Nortel Networks
The only address in this file defines your default gateway route
(your router). If this file is empty and the machine is rebooted,
then you will not have network access to your other servers.
Verifying the application server (AppSvr) installation
(SIP Application Module, IPCM, Web Client Manager,
Provisioning Module, H.323 Gatekeeper)
Verifying the application server (AppSvr) installation
The following commands are executed on the application server using
PuTTY SSH into the machine logical IP address.
Example: Open a PuTTY SSH session to 192.168.14.31
Procedure 53 Verifying the application server installation
Log into the server as nortel/<new nortel user password>
1 After installing the MCS Base Platform System Software CDs
1-6, execute the following command to verify IP addressing.
@mcsappsvr]/export/home/nortel:=> ifconfig -a
lo0:
flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4>
mtu 8232 index 1 inet 127.0.0.1 netmask ff000000
dmfe0:
flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEP
RECATED,IPv4,NOFAILOVER> mtu 1500 index 2 inet
192.168.14.32 netmask ffffff00 broadcast 192.168.14.255
groupname imspub
dmfe0:1:
flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4
> mtu 1500 index 2 inet 192.168.14.31 netmask ffffff00
broadcast 192.168.14.255
dmfe1:
flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DE
PRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu
1500 index 3 inet 192.168.14.33 netmask ffffff00 broadcast
192.168.14.255 groupname imspub
Notice several items:
ATTENTION
Use these same procedures for each of the listed servers.