Nortel Networks Sun Fire V100 - Manual (Page 63)

MCS 4-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Enabling or disabling the automatic
mount
Use the following procedure if you need to use the CD-ROM
auto-mount after installation of CD5.
Procedure 17 Enabling or disabling the CD-ROM auto-mount
At the management pc,
1 The system disables volmgt by default after CD5 is installed. To
toggle it back on to install additional CDs, follow this step.
Log in as root from the console and type the following command:
/etc/init.d/volmgt start
2 When you finish mounting the additional disk(s), remember to
disable the volume manager for better security. To disable it, use
the following command: /etc/init.d/volmgt stop
ATTENTION
Keep this procedure for future use.