Netopia 2200 - Manual (Page 103)

103
Configure
Configuring for Bridge Mode
1.
Browse into the Netopia Gateway’s web interface.
2. Click on the Configure button in the upper Menu bar.
3. Click on the LAN link.
The LAN page appears.
4. In the box titled LAN IP Inter-
face (Ethernet 100BT):
Make note of the Ethernet IP Address and
subnet mask.
You can use this address to access the
router in the future.
5. Click on the Advanced link in the left-
hand links toolbar.
6. Under the heading of Services, click
on the
Ethernet Bridge link.