Netopia 2200 - Manual (Page 332)

332
Important Safety Instructions
Australian Safety Information
The following safety information is provided in conformance with Australian safety requirements:
Caution
DO NOT USE BEFORE READING THE INSTRUCTIONS: Do not connect the Ethernet por ts to a carrier or
carriage ser vice provider’s telecommunications network or facility unless: a) you have the written
consent of the network or facility manager, or b) the connection is in accordance with a connection
permit or connection rules.
Connection of the Ethernet por ts may cause a hazard or damage to the telecommunication network
or facility, or persons, with consequential liability for substantial compensation.
Caution
■ The direct plug-in power supply ser ves as the main power disconnect; locate the direct plug-in
power supply near the product for easy access.
■ For use only with CSA Cer tified Class 2 power supply, rated 12VDC.
Telecommunication installation cautions
■ Never install telephone wiring during a lightning storm.
■ Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
■ Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network inter face.
■ Use caution when installing or modifying telephone lines.
■ Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electric shock from lightning.
■ Do not use the telephone to repor t a gas leak in the vicinity of the leak.