Netopia 2200 - Manual (Page 93)

93
Configure
Your Ser vice Provider may, for cer tain ser vices, want to provide configuration from its
DHCP ser vers to the computers on your LANs. In this case, the Gateway will relay the
DHCP requests from your computers to a DHCP ser ver in the Ser vice Provider's network.
Click the relay-agent and enter the IP address of the Ser vice Provider's DHCP ser ver in the
Ser ver Address field. This address is furnished by the Ser vice Provider.
☛
NOTE:
The relay-agent option only works when NAT is off and the Gateway is in router
mode.