Example filters, Example 1 example 2 example 3 – Netopia 2200 User Manual
Page 152
152
Example filters
Example 1
Incoming packet has the source address of 200.1.1.28
This incoming IP packet has a source IP address that matches the network address in the
Source IP Address field in Netopia Firmware Version 7.6. This will
not
for ward this packet.
Example 2
Incoming packet has the source address of 200.1.1.184.
This incoming IP packet has a source IP address that does not match the network address
in the Source IP Address field in Netopia Firmware Version 7.6. This rule
will
for ward this
packet because the packet does not match.
Example 3
Incoming packet has the source address of 200.1.1.184.
This rule does
not
match and this packet will be for warded.
Filter Rule:
200.1.1.0
(Source IP Network Address)
255.255.255.128
(Source IP Mask)
For ward = No
(What happens on match)
Filter Rule:
200.1.1.0
(Source IP Network Address)
255.255.255.128
(Source IP Mask)
For ward = No
(What happens on match)
Filter Rule:
200.1.1.96
(Source IP Network Address)
255.255.255.240
(Source IP Mask)
For ward = No
(What happens on match)