Netopia 2200 - Manual (Page 22)

22
Setting up the Netopia Gateway
Refer to your Quickstar t Guide for instructions on how to connect your Netopia gateway to
your power source, PC or local area network, and your Internet access point, whether it is a
dedicated DSL outlet or a DSL or cable modem. Different Netopia Gateway models are
supplied for any of these connections. Be sure to enable Dynamic Addressing on your PC.
Per form the following:
Microsoft Windows:
Step 1. Navigate to the TCP/IP Proper ties Control Panel.
a. Some Windows
versions follow a
path like this: Start menu -> Settings -> Control Panel -> Network (or Network and
Dial-up Connections -> Local Area Connection -> Properties) -> TCP/
IP [your_network_card] or Internet Protocol [TCP/IP] -> Properties