Netopia 2200 - Manual (Page 230)

230
• The -c count argument lets you specify the number of ICMP packets generated for the
ping request. Values greater than 250 are truncated to 250.
You can use the ping command to determine whether a hostname or IP address is
already in use on your network. You cannot use the ping command to ping the Netopia
Gateway’s own IP address.
quit
Exits the Netopia Gateway command line inter face.
reset arp
Clears the Address Resolution Protocol (ARP) cache on your unit.
reset atm
Resets the Asynchronous Transfer Mode (ATM) statistics.
reset crash
Clears crash-dump information, which identifies the contents of the Netopia Gateway regis-
ters at the point of system malfunction.
reset dhcp server
Clears the DHCP lease table in the Netopia Gateway.
reset diffserv
Resets the Differentiated Ser vices (diffser v) statistics.
reset enet
Resets Ethernet statistics to zero
reset heartbeat
Restar ts the hear tbeat sequence.