Netopia 2200 - Manual (Page 296)

296
Wireless MAC Address Authorization Settings
set wireless mac-auth option { on | off }
Enabling this feature limits the MAC addresses that are allowed to access the LAN as well
as the WAN to specified MAC (hardware) addresses.
set wireless mac-auth wrlss-MAC-list mac-address
MAC-address_string
Enters a new MAC address into the MAC address authorization table. The format for an
Ethernet MAC address is six hexadecimal values between 00 and FF inclusive separated by
colons or dashes (e.g., 00:00:C5:70:00:04).
set wireless mac-auth wrlss-MAC-list mac-address
“ MAC-address_string ” allow-access { on | off }
Designates whether the MAC address is enabled or not for wireless network access. Dis-
abled MAC addresses cannot be used for access until enabled.
RADIUS Server Settings
set radius radius-name " server_name_string "
Specifies the default RADIUS ser ver name or IP address.
set radius radius-secret " shared_secret "
Specifies the RADIUS secret key used by this ser ver. The shared secret should have the
same characteristics as a normal password.
set radius alt-radius-name " server_name_string "
Specifies an alternate RADIUS ser ver name or IP address to be used if the primar y ser ver
is unreachable.
set radius alt-radius-secret " shared_secret "
Specifies the secret key used by the alternate RADIUS ser ver.