Netopia 2200 - Manual (Page 224)

224
Starting and Ending a CLI Session
Open a telnet connection from a workstation on your network.
You initiate a telnet connection by issuing the following command from an IP host that sup-
por ts telnet, for example, a personal computer running a telnet application such as NCSA
Telnet.
telnet <ip_address>
You must know the IP address of the Netopia Gateway before you can make a telnet con-
nection to it. By default, your Netopia Gateway uses 192.168.1.254 as the IP address for
its LAN inter face. You can use a Web browser to configure the Netopia Gateway IP address.
Logging In
The command line inter face log-in process emulates the log-in process for a UNIX host. To
logon, enter the username (either admin or user), and your password.
• Entering the administrator password lets you display and update all Netopia Gateway
settings.
• Entering a user password lets you display (but not update) Netopia Gateway settings.
When you have logged in successfully, the command line inter face lists the username and
the security level associated with the password you entered in the diagnostic log.
Ending a CLI Session
You end a command line inter face session by typing quit from the SHELL node of the
command line inter face hierarchy.
Command Utilities
top Go to top level of configuration mode
quit Exit from configuration mode; return to shell mode
exit Exit from configuration mode; return to shell mode