Exposed addresses – Netopia 2200 User Manual
Page 141
Advertising
141
Security
•
UDP no-activity time-out: The time in seconds after which a UDP session will be ter-
minated, if there is no traffic on the session.
•
TCP no-activity time-out: The time in seconds after which an TCP session will be ter-
minated, if there is no traffic on the session.
•
Exposed Addresses: The hosts specified in Exposed Addresses will be allowed to
receive inbound traffic even if there is no corresponding outbound traffic. This is active
only if NAT is disabled on a WAN inter face.
•
Stateful Inspection Options: Enable and configure stateful inspection on a WAN inter-
face.
Exposed Addresses
You can specify the IP addresses you want to expose by clicking the
Exposed
addresses
link.
Advertising