Netopia 2200 - Manual (Page 132)

132
A typical SafeHarbour configuration is shown below:
Configuring a SafeHarbour VPN
Use the following procedure to configure your SafeHarbour tunnel.
1. Obtain your configuration information from your network administrator.
The tables “Parameter Descriptions” on page 136 describe the various parameters that
may be required for your tunnel. Not all of them need to be changed from the defaults
for ever y VPN tunnel. Consult with your network administrator.
2. Complete the Parameter Setup worksheet “IPSec Tunnel Details Parame-
ter Setup Worksheet” on page 133 .
The worksheet provides spaces for you to enter your own specific values. You can print
the page for easy reference. IPSec tunnel configuration requires precise parameter
setup between VPN devices. The Setup Worksheet (
page 133 ) facilitates setup and
assures that the associated variables are identical.