Igmp settings – Netopia 2200 User Manual

Page 249

Advertising
background image

249

CONFIG Commands

rent dynamically-assigned IP address. This allows you to get to the IP address assigned to
your Gateway, even though your actual IP address may change as a result of a PPPoE con-
nection to the Internet.

set dynamic-dns option [ off | dyndns.org ]
set dynamic-dns ddns-host-name

myhostname

.dyndns.org

set dynamic-dns ddns-user-name

myusername

set dynamic-dns ddns-user-password

myuserpassword

Enables or disables dynamic DNS ser vices. The default is

off. If you specify dyndns.org,

you must supply your hostname, username for the ser vice, and password.

Because different dynamic DNS vendors use different proprietar y protocols, currently only
www.dyndns.org is suppor ted.

IGMP Settings

These commands are suppor ted beginning with Firmware Version 7.5.1.

set igmp snooping [ off | on ]

Enables IGMP Snooping. See

“IGMP (Internet Group Management Protocol)” on page 97

for detailed explanation.

set igmp robustness

value

Sets IGMP robustness range: from 2 – 255. The default is 2. See

“IGMP (Internet Group

Management Protocol)” on page 97

for detailed explanation.

set igmp query-intvl

value

Sets the quer y-inter val range: from 10 seconds – 600 seconds, The default is 125 sec-
onds. See

“IGMP (Internet Group Management Protocol)” on page 97

for detailed explana-

tion.

set igmp query-response-intvl

value

Sets the quer y-response inter val range: from 5 deci-seconds (tenths of a second) – 255
deci-seconds. The default is 100 deci-seconds. See

“IGMP (Internet Group Management

Protocol)” on page 97

for detailed explanation.

Advertising