Upnp settings dsl forum settings tr-064 – Netopia 2200 User Manual
Page 299
299
CONFIG Commands
☛
Note:
To make a set of VLANs non-routable, the lan-uplink por t must be included in
at least one VLAN and must be excluded from any VLANs that are non-
routable.
UPnP settings
set upnp option [ on | off ]
PCs using UPnP can retrieve the Gateway’s WAN IP address, and automatically create NAT
por t maps. This means that applications that suppor t UPnP, and are used with a UPnP-
enabled Netopia Gateway, will not need application layer gateway suppor t on the Netopia
Gateway to work through NAT. The default is
on.
You can disable UPnP, if you are not using any UPnP devices or applications.
DSL Forum settings
TR-064 is a LAN-side DSL CPE configuration specification and TR-069 is a WAN-side DSL
CPE Management specification.
TR-064.
DSL Forum LAN Side CPE Configuration (TR-064) is an extension of UPnP. It
defines more ser vices to locally manage the Netopia Gateway. While UPnP allows open
access to configure the Gateway's features, TR-064 requires a password to execute any
command that changes the Gateway's configuration.
set dslf-lanmgmt option [ off | on ]
Turns TR-064 LAN side management ser vices on or off. The default is
on.