Netopia 2200 - Manual (Page 169)

169
Working with IP Filters and Filter Sets
If Protocol Type is set to TCP or UDP, the settings for por t comparison will appear.
These settings only take effect if the Protocol Type is TCP or UDP.
9. From the Source Port Compare pull-down menu, choose a comparison
method for the filter to use on a packet’s source port number.
Then select Source Port and enter the actual source por t number to match on (see
the table on page 158 ).
10. From the Destination Port Compare pull-down menu, choose a compari-
son method for the filter to use on a packet’s destination port number.
Then select Destination Port and enter the actual destination por t number to match
on (see the table on page 158 ).
11.
When you are finished configuring the filter, click the Submit button to
save the filter in the filter set.
Viewing filters
To display the table of input or output filters, select the Filter Set Name in the Filter Set
page and click the Add or Edit button.
The table of filters in the filtersets appears.