Netopia 2200 - Manual (Page 105)

105
Configure
11. If you are satisfied with the changes you have made, click Save and
Restart in the Save Database box to Apply changes and restart Gateway.
You have now configured your Netopia Gateway for bridging, and it will bridge all traffic
across the WAN. You will need to make configurations to your machines on your LAN. These
settings must be made in accordance with your ISP. If you ever need to get back into the
Netopia Gateway again for management reasons, you will need to manually configure your
machine to be in the same subnet as the Ethernet inter face of the Netopia, since DHCP
ser ver is not operational in bridge mode.