Netopia 2200 - Manual (Page 280)

280
set security pkt-filter filterset filterset-name [ in | out ] index
tos-mask value
Specifies the TOS (Type Of Ser vice) mask to match packets. The value for tos-mask can
be from 0 – 255.
set security pkt-filter filterset filterset-name [ in | out ] index
protocol value
Specifies the protocol value to match packets, the type of higher-layer Internet protocol the
packet is carr ying, such as TCP or UDP. The value for
protocol can be from 0 – 255.
set security pkt-filter filterset filterset-name [ in | out ] index
src-compare [ nc | ne | lt | le | eq | gt | ge ]
Sets the source compare operator action for the specified filter rule.
set security pkt-filter filterset filterset-name [ in | out ] index
dst-compare [ nc | ne | lt | le | eq | gt | ge ]
Sets the destination compare operator action for the specified filter rule.
Operator Action
nc No compare
ne Not equal to
lt Less than
le Less than or equal to
eq Equal to
ge Greater than or equal to
gt Greater than
Operator Action
nc No compare
ne Not equal to
lt Less than