Netopia 2200 - Manual (Page 79)

79
Configure
Pinhole Configuration Procedure. Use the following steps:
1.
From the Configure toolbar button -> Advanced link, select the Internal
Servers link.
Since Por t For warding is required for this example, the Netopia embedded Web ser ver
is configured first.
☛
NOTE:
The two text boxes, Web (HTTP) Server Port and Telnet Server Port, on this
page refer to the por t numbers of the Netopia Gateway’s embedded admin-
istration ports.
To pass Web traffic through to your LAN station(s), select a Web (HTTP) Por t number that is
greater than 1024. In this example, you choose 8100.
2.
Type 8100 in the Web (HTTP) Server Port text box.
3. Click the Submit button.
4. Click Advanced . Select the Pinholes link to go to the Pinhole page.